An uneven floor is a common problem that most residences deal with, mostly when a house is constructed above a kind of wet soil. An uneven floor can be happened by the concrete slab below the floor is sinking into the ground due to its weight. There are some solutions to fix problems like this, but the most efficient now day is using slab jacking Calgary.
What Is Slab Jacking
Slab jacking is one of the repairing methods for fixing a concrete slab that is sunk to the ground or sunk to the lower level of the original height. The slab jacking is used to raise the height of the concrete the sunken slab to the original height and fill the void gap between the concrete and the ground.
How Does The Slab Jacking Install
To install the slab jacking, our team will drill a hole in your floor. You should not worry because the hole will not be larger than a penny. The hole is needed to inject the filler into the concrete below the floor.
The next step is installing the port to the hole that is drilled before. Our team will install the device into the hole so the filler can be poured into the empty gap between the floor and the concrete.
And the last step, our team will inject the polyurethane foam in through the installed port. Our professional team is so experienced so you do not need to worry about the result. Our team can inject the foam in the right amount so the slab can be lifted into the purposed height level.
At the end of the process, the hole will be covered and smoothed over so the drilled area is presentable and will not be recognized as the drilled area before. The whole process is not taking a long time such as 30 minutes and done.
Price Of Slab Jacking
The price of slab jacking is not as expensive as you think. For your information, the price of hiring a professional to do slab jacking is cheaper than replacing the concrete.
The price of slab jacking service is depended on the total slab that is needed to be lifted. To know more information, you can slab jacking Calgary visit us at Ener-Spray.
Why Slab Jacking Is Good For Repairing Interior Floor
By using the slab jacking method, you can fix the uneven floor problem by injecting the uneven floor with concrete or special foam called polyurethane foam. The concrete or polyurethane foam will fill the empty room beneath the floor and lift your floor to its original height.
Slab jacking is the best solution for repairing sunken concrete. The foam we used in slab jacking is quick to solidify, The foam cures only 15 minutes after the injection process. The foam is also solid and long live since the foam does not change over with time, moisture, or the soil.
The polyurethane foam also has a hydrophobic characteristic. The foam doesn’t have any issues when installed in the wet application. The foam will not make any chemical reaction with water, so the water is still safe to use.
The foam also creates a moisture barrier to the concrete. The water resistance characteristic of the polyurethane foam protects the concrete from water penetration. This can help the concrete to minimalize the risk of erosion by water.
See also : Top Flooring Options for Your Home
The Reason Why Concrete Slab Sink
You must know the reason why the concrete slab sink is happening in most houses. The source problem of the uneven floor started during the early house construction. The concrete slab is poured on the wet and poorly contracted soil. Over time, the soil will start to settle and when it happened your slab concrete will follow the ground too.
When the concrete is sunk near the doorway or wall it will create gaps at the seams between the wall and door. It can happen because that is the weakest spot of the wall. It’s difficult to notice the problem of the sunken concrete before it happened because it started from the crack inside the floor.
The most noticeable sign of the sunken slab problem is the uneven floor. The uneven floor will show you that in you have a slab problem in your house, but that can be seen when the slab is already sunken for a while.
The other sign is the door or window is getting stuck more often. The door or window might be stuck because the slab beneath the floor starting to sink. The sinking slab will affect the window and door and the market hem not fit with the frame as it used to be.
To fix the slab problem you can use slab jacking Calgary or you can visit us at the Ener-Spray for the slab jacking with the professional team.
